| WNYFLFA? Need HeavyDuty Clear Dryer Tunnel - CLICK HERE for the Pet Manual Forum Home Page |
|
Years ago I ordered what turned out to be a really NICE, heavy duty clear
dryer tubing tunnel from Sandy DeBout from Western New York & Finger Lakes
Ferret Association. An email to the address I had for Sandy was returned as
'invalid', so am just wondering if anyone knows how I can find Sandy or
contact WNYFLFA?
If not, does anyone know where I can get the good, heavy duty clear dryer
tunnels? Need one for a friend who just got his first ferret. I ordered one
for my kids on eBay several months ago and it was really lightweight
compared to the old one I had, so hate to recommend that one to him.
Hope somebody can point me in the right direction......
Thanks for any help!!
jumpingmouse, kylie & gilbert
|
|
|
| MC |
You can get 'ferret proof' clear tubing from here..mine has lasted over 3
years now!
http://www.rockler.com/ecom7/findpr...&DID=6&sku=5742
MC
<jumpingmouse02@earthlink.net> wrote in message
news:0Ewed.5298$%h1.533@newsread3.news.pas.earthlink.net...
> If not, does anyone know where I can get the good, heavy duty clear dryer
> tunnels? Need one for a friend who just got his first ferret. I ordered
one
> for my kids on eBay several months ago and it was really lightweight
> compared to the old one I had, so hate to recommend that one to him.
>
> Hope somebody can point me in the right direction......
|
|
|
| Jason and Holly Harper |
Jacquie,
I bought mine from Ferret Warez at a show. It's held up so far, even with
Kolby chewing on the end and dragging it around the room. :)
http://www.ferretwarez.com
Holly
<jumpingmouse02@earthlink.net> wrote in message
news:0Ewed.5298$%h1.533@newsread3.news.pas.earthlink.net...
> Years ago I ordered what turned out to be a really NICE, heavy duty clear
> dryer tubing tunnel from Sandy DeBout from Western New York & Finger Lakes
> Ferret Association. An email to the address I had for Sandy was returned
as
> 'invalid', so am just wondering if anyone knows how I can find Sandy or
> contact WNYFLFA?
>
> If not, does anyone know where I can get the good, heavy duty clear dryer
> tunnels? Need one for a friend who just got his first ferret. I ordered
one
> for my kids on eBay several months ago and it was really lightweight
> compared to the old one I had, so hate to recommend that one to him.
>
> Hope somebody can point me in the right direction......
>
> Thanks for any help!!
> jumpingmouse, kylie & gilbert
>
>
|
|
|
|
Hmmmmmmm............the one person who put a comment about the tunnels said
"when mine start to tear, I just cut them into smaller pieces" - that sounds
like the poor quality ones that I got this last time I got a clear tunnel.
That first one I got years ago STILL doesn't have a tear in it after years
and years and years of heavy use - but the latest one I've only had a couple
of years is getting to be a mess. So, I guess what I'm asking is that if
anyone knows for sure where I can get the heavy duty ones. Cheapy ones
that tear are available real reasonable on eBay, but they sure don't last
long. (did that make sense? LOL) Anyway, thanks for all the
info......hope someone knows how I can get ahold from someone from WNYFLFA
and that they still carry the same ones.........
jumpingmouse, kylie & gilbert
"Jason and Holly Harper" <jhharper@tm.net> wrote in message
news:wOCed.3499$Pd2.1446623@monger.newsread.com...
> Jacquie,
>
> I bought mine from Ferret Warez at a show. It's held up so far, even with
> Kolby chewing on the end and dragging it around the room. :)
> http://www.ferretwarez.com
>
> Holly
>
> <jumpingmouse02@earthlink.net> wrote in message
> news:0Ewed.5298$%h1.533@newsread3.news.pas.earthlink.net...
>> Years ago I ordered what turned out to be a really NICE, heavy duty clear
>> dryer tubing tunnel from Sandy DeBout from Western New York & Finger
>> Lakes
>> Ferret Association. An email to the address I had for Sandy was returned
> as
>> 'invalid', so am just wondering if anyone knows how I can find Sandy or
>> contact WNYFLFA?
>>
>> If not, does anyone know where I can get the good, heavy duty clear dryer
>> tunnels? Need one for a friend who just got his first ferret. I ordered
> one
>> for my kids on eBay several months ago and it was really lightweight
>> compared to the old one I had, so hate to recommend that one to him.
>>
>> Hope somebody can point me in the right direction......
>>
>> Thanks for any help!!
>> jumpingmouse, kylie & gilbert
>>
>>
>
>
|
|
|
| MC |
Trust me..it **IS** heavy duty. (The one I pasted the URL for..it is
industrial for sawdust collecting systems)....My brats haven't even
scratched the stuff and they try. The ends are intact..no tears or rips....
You won't go wrong......
MC
<jumpingmouse02@earthlink.net> wrote in message
news:P4Ded.5331$KJ6.5258@newsread1.news.pas.earthlink.net...
> Hmmmmmmm............the one person who put a comment about the tunnels
said
> "when mine start to tear, I just cut them into smaller pieces" - that
sounds
> like the poor quality ones that I got this last time I got a clear tunnel.
> That first one I got years ago STILL doesn't have a tear in it after years
> and years and years of heavy use - but the latest one I've only had a
couple
> of years is getting to be a mess. So, I guess what I'm asking is that if
> anyone knows for sure where I can get the heavy duty ones. Cheapy ones
> that tear are available real reasonable on eBay, but they sure don't last
> long. (did that make sense? LOL) Anyway, thanks for all the
> info......hope someone knows how I can get ahold from someone from WNYFLFA
> and that they still carry the same ones.........
|
|
|
|
K, I'm trusting you on this one, MC...... :-))
Thanks much!! Will pass along the information!
jumpingmouse, kylie & gilbert
"MC" <MC@ProgressiveSystemsInc.org> wrote in message
news:clf9fs0l45@news4.newsguy.com...
> Trust me..it **IS** heavy duty. (The one I pasted the URL for..it is
> industrial for sawdust collecting systems)....My brats haven't even
> scratched the stuff and they try. The ends are intact..no tears or
> rips....
>
> You won't go wrong......
>
> MC
>
> <jumpingmouse02@earthlink.net> wrote in message
> news:P4Ded.5331$KJ6.5258@newsread1.news.pas.earthlink.net...
>> Hmmmmmmm............the one person who put a comment about the tunnels
> said
>> "when mine start to tear, I just cut them into smaller pieces" - that
> sounds
>> like the poor quality ones that I got this last time I got a clear
>> tunnel.
>> That first one I got years ago STILL doesn't have a tear in it after
>> years
>> and years and years of heavy use - but the latest one I've only had a
> couple
>> of years is getting to be a mess. So, I guess what I'm asking is that
>> if
>> anyone knows for sure where I can get the heavy duty ones. Cheapy ones
>> that tear are available real reasonable on eBay, but they sure don't last
>> long. (did that make sense? LOL) Anyway, thanks for all the
>> info......hope someone knows how I can get ahold from someone from
>> WNYFLFA
>> and that they still carry the same ones.........
>
>
|
|
|
| Jason and Holly Harper |
Oh I'm definitely sure the tube MC recommended will work great. But just
for the record, my tube hasn't torn...Kolby just thinks he can chew on
everything. ;-)
Holly
<jumpingmouse02@earthlink.net> wrote in message
news:BdGed.51$kM.30@newsread3.news.pas.earthlink.net...
> K, I'm trusting you on this one, MC...... :-))
>
> Thanks much!! Will pass along the information!
>
> jumpingmouse, kylie & gilbert
>
>
> "MC" <MC@ProgressiveSystemsInc.org> wrote in message
> news:clf9fs0l45@news4.newsguy.com...
> > Trust me..it **IS** heavy duty. (The one I pasted the URL for..it is
> > industrial for sawdust collecting systems)....My brats haven't even
> > scratched the stuff and they try. The ends are intact..no tears or
> > rips....
> >
> > You won't go wrong......
> >
> > MC
> >
>
|
|
|
|
|
|
|
